Single Pump Controller - Advanced Single Phase

• Enclosure:
  
  
  
  
  • IP56 weatherproof rating
  
  
  • Powder coated mild steel
  
  
  • Inner door and removable gland plate
  
  
  
  


• Protection:
  
  
  
  • Padlockable mains power isolator switch
  
  
  • Circuit breaker protected low voltage control and input circuitry
  
  
  • Contactor and thermal overload protection of pumps
  
  
  • Electronic short and overload protection of strobe/buzzer
  
  
  
  


• Alarms:
  
  
  
  • Visual (strobe) and audible (buzzer) alarms
  
  
  
  


• Control & interface:
  
  
  
  • Advanced HMI with backlit LCD screen & navigation keys
  
  
  • Visual and audible alarm mute/reset/test button
  
  
  • System and pump status overview
  
  
  • Auto/off/manual operation of pumps
  
  
  • Alarm display and reset screen
  
  
  • Logged data for start and fault counters, pump run hours
  
  
  • Input configuration and parameter adjustment
  
  
  • Tank/pit level display (with transducer conencted)
  
  
  • Password protection
  
  
  
  


• Inputs:
  
  
  
  • 1x analogue 4-20mA input for hydrostatic transducer
  
  
  • 3x digital 24Vdc inputs for float/pressure/flow switches
  
  
  • Standard terminal setup: Low level, pump stop, pump start and high level float switches
  
  
  
  


• Outputs:
  
  
  
  • 1x pump supply output
  
  
  • 1x BMS volt free output for common fault
  
  
  • Modbus RS485 connections
  
  
  
  

Function Features

• Operation:
  
  
  
  
  • Anti seize timer runs pump periodically during low use
  
  
  • Optional time out on manual pump mode
  
  
  • Maximum idle time ensures minimum tank level is maintained
  
  
  • Level alarm delay avoiding nuisance alarms
  
  
  • Current loop reverse operation for maintain pressure or emptying, rather than filling, a tank
  
  
  • Smart auto silencing and chirp mode alarm
  
  
  
  


• Fault protection:
  
  
  
  • Pump overload shut-down
  
  
  • High level alarm
  
  
  • Low level alarm and shut-down
  
  
  • Low pressure alarm (with pressure switch)
  
  
  • Low flow/prime loss shut-down (with flow switch)
  
  
  • Optional maximum pump run time shut-down
  
  
  • Optional transducer fault alarm
  
  
  
  

Optional Modifications

• 316 stainless steel enclosure


• Free standing enclosure with plinth


• Separate compartment for power authority meters


• Generator input socket and automatic changeover


• Battery backup high level alarm


• 4G SMS alarm sender


• Conductivity relays and probe inputs


• Mains bypass or tank top up control with solenoid valve

Common Applications

• Level Control:
  
  
  
  
  • Submersible sewage
  
  
  • Submersible storm water
  
  
  • Transfer pumping
  
  
  
  


• Pressure control:
  
  
  
  • Pressure boosting
  
  
  
  


• With modifications:
  
  
  
  • Rain/mains changeover
  
  
  
  

FPC-15605 Range - Single Phase (230Vac)

Code	Overload Rating	Enclosure Size
FPC-15605-AA	1.6 - 2.5 Amp	400x400x250mm
FPC-15605-A	2.5 - 4 Amp	400x400x250mm
FPC-15605-B	4 - 6 Amp	400x400x250mm
FPC-15605-BB	5.5 - 8 Amp	400x400x250mm
FPC-15605-C	7 - 10 Amp	400x400x250mm
FPC-15605-D	9 - 13 Amp	400x400x250mm
FPC-15605-E	12 - 18 Amp	400x400x250mm

Other Overload Ratings available on request