Menu
Our Location on Google mapsFollow Us on Linkedin
My Bag

Your bag is currently empty.

Liquid Level Alarm
Liquid Level Alarm
Liquid Level Alarm

Liquid Level Alarm - With SMS

FPC-12651-SMS

MATelec Australia’s Liquid Level Alarm with SMS features our newly designed ME-Link module, which is a cellular CAT-M1 remote monitoring and control device utilising the 700Mhz frequency for 'best in class' signal strength. The ME-Link reports status information and active alarms from the Liquid Level Alarm. The ME-Link Module can also be used to control external devices with the two onboard relay outputs. Easy to set up SMS commands are used to configure the operation and alarms without the need for any additional software. 

  • Enclosure:
    • IP54 rated, powder coated mild steel enclosure with removable gland plate
  • Protection:
    • Low voltage control and input circuitry
    • Din rail mounted terminal connections
  • Control & interface:
    • Visual (strobe) and audible (buzzer) alarms
    • Level alarm keypad interface:
      • Indicator lights for power on, level alarm
      • Alarm mute/reset/test button
    • Level alarm PCB control module
    • ME-Link IoT/SMS module (requires micro SIM card from CAT-M1 enabled network provider - Only Telstra currently)
    • Vandal resistant antenna
    • Battery for backup on mains power failure
  • Inputs:
    • Single phase (230Vac) power supply
    • Digital 12Vdc input for float switch
    • 5x additional 12Vdc inputs on ME-Link module
  • Outputs:
    • 2x Relay outputs on ME-Link module
  • Included with panel:
    • 10 Amp 3 pin 1.5m power supply lead

Function Features

  • High level alarm - Provides warning indication and alarm when a water storage tank is full
  • Auto-silencing alarm - If not muted, the buzzer will silence after 5 minutes, then sound briefly every 5 minutes (this feature can be disabled if a continuous alarm is required)

SMS alarm messaging:

  • SMS messaging for level alarm and power/battery supply status, and from up to 5 additional inputs
  • Easily programming with SMS commands
  • Up to 10 phone numbers can receive messages
  • Smart help responses on incorrect commands
  • Once, repeat or sequential notification messaging 
  • Repeat or sequential messaging until user accepted
  • Daily reminder messages for active alarms
  • Remote control of systems and or devices via the 2 relay outputs
  • Periodic test messages to ensure ME-Link is connected and operating
  • Temporary disabling of notifications for site servicing
  • Logged data for ‘last alarm’, ‘acknowledgment time and number’
Available
Contact MATelec Australia for a competitive price and prompt reliable service