Under Sink Alarm Valve Shut-Off
- In the event of ‘high level’ or moisture detected in the drip tray (if applicable), the controller activates the alarm, pulse closes the valve (if applicable) and isolates power to the dishwasher (if applicable), ensuring no further mains water enters the sink and chamber
- If power to the controller is lost or switched off, the valve is immediately closed.
Enclosure
- IP54 rated, polycarbonate enclosure with mounting brackets
- Low voltage control and input circuitry
- Pre-wired connections - No hard wiring needed
- Audible (buzzer) alarm
- Level alarm keypad interface, with:
- Indicator lights for power on and level alarm
- Audible alarm mute/reset/test button
- Shut-off controller PCB control module
- Single phase (230Vac) power supply
- Digital 12Vdc input for float switch
- Digital 12Vdc input for moisture sensing probe (for FPC-12662 only)
- 12Vdc output for solenoid valve (for all but FPC-12660, 2x outputs for FPC-12667)
- 10 Amp GPOs for supply to dishwashers (for all but FPC-12659, 2x outputs for FPC-12666)
- BMS volt free output for common fault
- 10 Amp 3 pin 1.5m power supply lead (2x leads for FPC-12666)
- Magnetic float switch with 10m cable
- 20mm male/male 12Vdc pulse latching solenoid valve (for all but FPC-12660, 2x floats for FPC-12667)
- Moisture sensing probe (FPC-12662 only).
Valve Shut-Off
| Code | Description | Enclosure Size |
| FPC-12659 | Undersink Alarm - Valve Shut-Off | 200x160x95mm |
