Standard Pump Controllers Electronic Overload - Single Door
Standard Range
- Enclosure:
- IP54 rated, powder coated mild steel enclosure with single door and removable gland plate (suitable for mounting indoors only)
- Protection:
- Pad-lockable mains power isolator switch
- Low voltage control and input circuitry
- Individual pump isolation
- Wide range electronic overload protection of pump, built into PCB
- Electronic short and overload protection of strobe & buzzer
- Din rail mounted terminal connections
- Control & interface:
- Single or dual pump keypad interface:
- Indicator lights for power on, level alarm, pump run and fault
- Push buttons for alarm mute/reset, pump auto/off/manual control
- PCB control module with dipswitches for adjusting configuration
- Visual (strobe) and mutable audible (buzzer) alarms
- Single or dual pump keypad interface:
- Inputs:
- Single phase (230Vac) power supply
- 4x digital 12Vdc inputs for float or pressure switches, optional low flow switch
- Digital 12Vdc input for additional external mute button
- Standard terminal setup: Pump stop, pump start and high level float switches
- Outputs:
- 1x Pump supply output
- BMS volt free output for common fault
Function Features
- High level alarm delay
- Smart chirp mode alarms
- Manual pump control
- Level control mode
- Maintain minimum level
- Pressure control mode
Fault Protection
- Pump overload protection
- Pump anti-seize protection
- High level alarm
- Low level alarm
- Low flow/prime loss protection
- Low pressure alarm
Common Applications
- Submersible sewage
- Submersible stormwater
- Pressure boosting
Standard Pump Controllers Electronic Overload - Single Door
Code | No of Pumps | Phase/Voltage | Overload Rating |
FPC-15002-LR | 1 | 1 Phase / 230Vac | 0.1 - 6 Amp |
FPC-15002-HR | 1 | 1 Phase / 230Vac | 5 - 16 Amp |
Modification Options
- Max pump run time protection
Available
Contact MATelec Australia for a competitive price and prompt reliable service