Dual Pump Controller - Standard

Dual Pump Controller   Standard


With BMS - Three Phase
Pack: 1
Click here to locate your nearest stockist.

Product Features

  • Enclosure:
    • IP56 weatherproof rating
    • Powder coated mild steel
    • Inner door and removable gland plate
  • Protection:
    • Padlockable mains power isolator switch
    • Circuit breaker protected low voltage control and input circuitry
    • Individual pump isolation
    • Contactor and thermal overload protection of pumps
    • Electronic short and overload protection of strobe/buzzer
  • Alarms:
    • Visual (strobe) and audible (buzzer) alarms
  • Control & interface:
    • Electronic Keypad
    • Indicator lights for power on, level alarm, pump run/fault
    • Visual and audible alarm mute/reset/test button
    • Auto/off/manual operation of pumps
    • Dipswitches for input and operation configuration
  • Inputs:
    • 4x digital 12Vdc inputs for float/pressure/flow switches
    • Standard terminal setup: Low level, pump stop, pump start and high level float switches
  • Outputs:
    • 2x pump supply outputs
    • BMS volt free outputs for power on, high level, individual pump run and fault

Function Features

  • Operation:
    • Maximum run timer and auto alternation of pump duty
    • Anti seize timer runs pumps periodically during low use
    • Optional time out on manual pump mode
    • Maximum idle time ensures minimum tank level is maintained
    • Staggered pump start
    • Level alarm delay avoiding nuisance alarms
    • Smart auto silencing and chirp mode alarm
  • Fault protection:
    • Pump overload shut-down
    • High level alarm
    • Low level alarm and shut-down
    • Low pressure alarm and shut-down (with pressure switch)
    • Low flow/prime loss shut-down (with flow switch)
    • Optional maximum pump run time shut-down

Optional Modifications

  • 316 stainless steel enclosure
  • Generator input socket and automatic changeover
  • Battery backup high level alarm
  • 4G SMS alarm sender
  • Conductivity relays and probe inputs

Common Applications

  • Level Control:
    • Submersible sewage
    • Submersible storm water
    • Transfer pumping
  • Pressure control:
    • Pressure boosting
  • Alternative versions available for:
    • Hot Water Circulation (FPC-30207)
    • Rain/mains changeover (FPC-32240)

FPC-30240 Range - Three Phase (400Vac)

Code Overload Rating Enclosure Size
FPC-30240-AA 1.6 - 2.5 Amp 400x400x200mm
FPC-30240-A 2.5 - 4 Amp 400x400x200mm
FPC-30240-B 4 - 6 Amp 400x400x200mm
FPC-30240-BB 5.5 - 8 Amp 400x400x200mm
FPC-30240-C 7 - 10 Amp 400x400x200mm
FPC-30240-D 9 - 13 Amp 400x400x200mm
FPC-30240-E 12 - 18 Amp 400x400x200mm

 Other Overload Ratings available on request

Download PDFs

Specification Sheet - FPC_30240
Innovators, Manufacturers and Distributors of Electrical Products