Hot Water

FPC-8XX4X-HWC

HydroSTART Hot Water Circulation Panels

Single or dual pump controller panels, IP54/IP56 rated, with capacitive touch interface and electronic overload protection.

HydroSTART Hot Water Circulation Panels image 1HydroSTART Hot Water Circulation Panels image 2HydroSTART Hot Water Circulation Panels image 3HydroSTART Hot Water Circulation Panels image 4HydroSTART Hot Water Circulation Panels image 5
OverviewProduct DetailsSKU DetailsSupport MaterialRelated Products
Download Spec Sheet

Overview

MATelec Australia’s HydroSTART Controller brings the features of the standard single and dual pump controllers into a new age with a redesigned capacitive touch keypad and control module with pump current sensing, providing wide range electronic overload protection which now functions with both single and three phase pumps.

Additional control inputs and functionality have been incorporated into the new design to enhance the controller’s flexibility and cover an even wider range of pumping applications. The HydroSTART is the new standard for pump controls.

Product Details

Enclosure

  • Powder coated mild steel enclosure with removable gland plate
  • IP54 rated with single door, for indoor mounting (Single Door version), or:
  • IP56 rated with inner door for outdoor mounting (Inner Door version) 

Protection

  • Pad lockable mains power isolator switch 
  • Low voltage control and input circuitry 
  • Individual pump circuit breaker protection/isolation 
  • Contactors for pump switching (three-phase panels) 
  • Electronic short and overload protection of alarms
  • Din rail mounted terminal connections

Control & Interface

  • HydroSTART single or dual pump capacitive touch keypad interface:
  • Indicator lights for system and pump status.
  • Buttons for alarm mute/reset and pump mode selection
  • HydroSTART PCB control module with dipswitches for adjusting configuration
  • Visual (strobe) and audible (buzzer) alarms
  • Pump current sensing providing adjustable overload & other protections

Inputs

  • Single phase (230Vac) or three phase (400Vac) power supply 
  • Digital input for Thermostat and Time Clock
  • Hot Water Terminal Set up, with Volt Free BMS outputs and system enable

Outputs

  • 1 or 2x pump supply outputs 
  • BMS volt-free output for common fault 
  • Modbus RTU Serial RS485 connections for SCADA

SKU Details

Code Doors Pumps Phase/Voltage Selectable Overload Options
FPC-81141-HWC 1 1 1 Phase / 230 Vac 0.1-6AMP, 5-16AMP
FPC-81143-HWC 1 1 3 Phase / 400 Vac 0.1-6AMP, 5-16AMP
FPC-81241-HWC 1 2 1 Phase / 230 Vac 0.1-6AMP, 5-16AMP
FPC-81243-HWC 1 2 3 Phase / 400 Vac 0.1-6AMP, 5-16AMP
FPC-82141-HWC 2 1 1 Phase / 230 Vac 0.1-6AMP, 5-16AMP
FPC-82143-HWC 2 1 3 Phase / 400 Vac 0.1-6AMP, 5-16AMP
FPC-82241-HWC 2 2 1 Phase / 230 Vac 0.1-6AMP, 5-16AMP
FPC-82243-HWC 2 2 3 Phase / 400 Vac 0.1-6AMP, 5-16AMP

Additional Options

  • /BMS – With Building Management System (BMS) module providing volt free outputs for power on and individual Pump Run and Fault
  • /SMS - With ME-Link module for SMS Alarm/Status messaging or expansion to the Propitect® IoT Platform
  • /Gen – With Generator Input socket and manual changeover switch
  • /ATS – With Automatic Generator Changeover Switch
  • /TC – With Time clock for time-of-day operation

Product Support Material

Filters

0resources

Loading…

HydroSTART Hot Water Circulation Panels – Pump Controller | MATelec Australia