Standard Set-Point Alarm
The Standard Set-Point Alarms are designed to receive a signal from either a 12Vdc Switched Control input or two single point Conductivity Probes and triggers an audible alarm when activated. The unit comes in a more robust IP54 polycarbonate enclosure and features a keypad interface with status indication lights and alarm mute button.
Level Alarm
- Provides warning indication and alarm when a water storage tank is empty or full
Auto-silencing Alarm
- If not muted, the buzzer will silence after 5 minutes, then sound briefly every 5 minutes (this feature can be disabled if a continuous alarm is required).
Enclosure
- IP54 rated, polycarbonate enclosure
- Low voltage control and input circuitry
- Audible (buzzer) alarm
- Level alarm keypad interface:
- Indicator lights for power on, level alarm
- Alarm mute/reset/test button
- Level alarm PCB control module
- Single phase (230Vac) power supply
- Digital 12Vdc input for float switch or conductivity probes
- BMS volt free output for common fault (NO & NC)
- 10 Amp 3 pin 1m power supply lead (230Vac)
Liquid Level Alarm - Standard
| Code | Description | Enclosure Size |
| FPC-12650 | Standard Set-Point Alarm | 125x90x60mm |
