Our Location on Google mapsFollow Us on Linkedin
My Bag

Your bag is currently empty.

Hot Water Circulation Controller   Standard Dual Pump

Hot Water Circulation Controller - Standard - Electrical Overload

  • Enclosure:
    • IP54 weatherproof rating
    • Powder coated mild steel
    • Removable gland plate
  • Protection:
    • Padlockable mains power isolator switch
    • Low voltage control and input circuitry
    • Individual pump isolation
    • Wide range electronic overload protection of pumps
    • Electronic short and overload protection of strobe/buzzer
  • Alarms:
    • Visual (strobe) and audible (buzzer) alarms
  • Control & interface:
    • Electronic keypad
    • Indicator lights for power on, level alarm, pump run/fault
    • Visual and audible alarm mute/reset/test button
    • Auto/off/manual operation of pumps
    • Dipswitches for input and operation configuration
  • ​Inputs:
    • 12Vdc input for thermostat
  • Outputs:
    • 2x pump supply outputs
    • 1x BMS volt free output for common fault

Function Features

  • Operation:
    • 6 hour maximum pump run timer and auto alternation
    • Optional time out on manual pump mode
    • Smart auto silencing and chirp mode alarm
  • ​Fault protection:
    • Pump overload shut-down

FPC-30005 - Single Phase (230Vac)

Code Overload Rating Enclosure Size
FPC-30005 0.1 - 6 Amp 400x300x150mm
Contact MATelec Australia for a competitive price and prompt reliable service