Menu
Our Location on Google mapsFollow Us on Linkedin
My Bag

Your bag is currently empty.

UndersinkSullage Chamber Alarm
UndersinkSullage Chamber Alarm
UndersinkSullage Chamber Alarm

Valve, Pump, BWU & Dishwasher Shut-Off With Drip Tray Moisture Sensor

FPC-12662-NDY
  • Enclosure:
    • IP54 weatherproof rating
    • Polycarbonate
    • Mounting brackets included
  • Protection:
    • Low voltage control and input circuitry
    • No hard wiring needed
  • Alarms:
    • Audible (buzzer) alarm
  • Control & interface:
    • Electronic Keypad
    • Indicator lights for power on and level alarm
    • Audible alarm mute/reset/test button
  • Inputs:
    • Digital 12Vdc input for float switch
    • Digital 12Vdc input for moisture sensing probe
  • Outputs:
    • 12Vdc output for solenoid valve
    • 3x 10 Amp GPOs for power supply to pump, boiling water unit and dishwasher
    • BMS volt free output for common fault
  • Included with panel:
    • 3x 10 Amp 3 pin 1.5m power supply leads (230Vac)
    • 20mm male/male 12Vdc pulse latching solenoid valve (pre-connected)
    • Magnetic float switch with 10m cable (pre-connected)
    • Moisture sensing probe (pre-connected)

Function Features

  • In the event of ‘high level’ or fluid detected in the drip tray, the controller activates the alarm, pulse closes the valve, ensuring no further mains water enters the sink and chamber, and isolates power to the dishwasher, pump and boiling water unit, ensuring no further ‘inflow’ to the chamber occurs
  • If power to the controller is switched off, the valve is immediately closed
Available
Contact MATelec Australia for a competitive price and prompt reliable service