Rain/Mains Controller with Varaible Speed Pump (VSD) Interface
- If rainwater becomes available, the controller pulse closes the mains water valve and provides a run signal to the variable speed drive.
- In the event of rainwater depletion or power failure, the controller stops the run signal to the VSD and pulses the valve open for mains water use.
- In the event of a pump fault, the controller pulse opens the valve but continues the run signal to the VSD, allowing it to start again when the fault has cleared.
Enclosure
- IP56 rated, powder coated mild steel enclosure with inner door and removable gland plate
- IP54 weatherproof rating
- Polycarbonate
- Includes mounting brackets
- Low voltage control and input circuitry
- Electronic keypad
- Indicator lights for rain/mains water and system fault
- System test button for checking pump and valve function
- 12Vdc input for float switch
- 12Vdc Input for VSD fault signal
- 12Vdc output for solenoid valve
- Volt free output for VSD run signal
- 25mm female/female 12Vdc pulse latching solenoid valve (other sizes available)
- 9006 float switch with 10m cable
- 10 Amp 3 pin 1.5m power supply lead
Rain/Mains - VSD Interface
| Code |
|---|
| FPC-12750 |
