Standard Set-Point Alarm Plus
The Standard Set-Point Level Alarm Plus expands on the capabilities of the Standard Set-Point Alarm with the addition of a built-in visual strobe on top of the enclosure. The alarm strobe indication remains on even after the audible alarm auto-silences and until the alarm set point is cleared. This alarm panel features the standard audible alarm and keypad interface with status indication lights and alarm mute button along with more flexible supply and connection options than the Standard Set-Point Alarm.
Level Alarm
- Provides warning indication and alarm when a water storage tank is either empty or full (high level only for -FS & -QP versions).
Auto-silencing Alarm
- If not muted, the buzzer will automatically silence after 5 minutes (this feature can be disabled if a continuous alarm is required).
Enclosure Options
- IP54 rated, polycarbonate enclosure with mounting brackets
- IP54 rated, powder-coated mild steel enclosure with removable gland plate for heavy-duty applications.
Protection
- Low voltage control and input circuitry.
- Available with a Quick Plug for DIY installations (FPC-12651-QP)
Control & Interface
- Visual (strobe) and audible (buzzer) alarms.
- Level alarm keypad interface:
- Indicator lights for power on, level alarm.
- Alarm mute/reset/test button.
- Level alarm PCB control module.
Inputs
- Single phase (230Vac) power supply.
- Digital 12Vdc input for float switch or conductivity probes.
Outputs
- BMS volt-free output for common fault (NO & NC).
Included with Panel
- Prewired 230Vac quick plug for DIY installations.
- Pre-hard-wired 9006 float switch with 10m cable (FPC-12651-FS only).
- 9006 float switch with 10m cable and quick plug connector (FPC-12651-QP only).
Optional Extras
- Quick Plug
- Hardwired Float Switch
- Battery Back-up
- 10 A SPO for Auto Pump Connection
|
Code |
Description |
Enclosure Size |
|
FPC-12651 |
Standard Set-Point Alarm Plus Strobe (Float Switch Extra) |
175x130x80mm |
|
FPC-12651-FS |
Standard Set-Point Alarm Plus Strobe & Pre Wired 10m Float Switch |
175x130x80mm |
|
FPC-12651-QP |
Standard Set-Point Alarm Plus Strobe & Quick Plug Float Switch |
175x130x80mm |
|
FPC-12654 |
Standard Set-Point Alarm Plus Strobe & Auto-Pump Connection |
200x160x95mm |
|
FPC-12657 |
Standard Set-Point Alarm Plus Strobe & Battery Back-Up |
240x195x95mm |
|
FPC-12663 |
Standard Set-Point Alarm Plus Strobe & 12Vdc Supply |
175x130x80mm |
|
FPC-12675 |
Standard Set-Point Plus Strobe & High-Level Valve Shut-Off |
200x160x95mm |
|
FPC-12680 |
Standard Set-Point Plus - Differential Pressure |
175x130x80mm |
