Hydrotouch Pump Controllers

The HydroTOUCH range of pump controllers is an market leading, second generation multi-pump controller designed to operate up to 12 pumps. It features a wide range of advanced control options and a highly flexible array or input and output signals, both digital and analogue. Incorporating an easy set-up wizard and a user friendly touch screen, operation of these sophisticated controllers is a breeze!
HydroTOUCH controllers have been designed for three different control operations - Pressure, Level, and Temperature, and are highly customisable to suit your specific application.

Hardware Features
- Enclosure:
- IP56 weatherproof rating
- Powder coated mild steel
- Inner door and removable gland plate
- Protection:
- Padlockable mains power isolator switch
- Circuit breaker protected low voltage control and input circuitry
- Individual pump isolation
- Contactor and thermal overload protection of pumps
- Overload protection for strobe
- Alarms
- Visual (strobe) and audible (buzzer) alarms
- Control & interface:
- Hydrotouch colour touch screen interface
- Main screen with system, pump, fault and sensor status
- Individual pump monitoring screen with status, run hours and number of starts, auto/off/manual control of pumps
- Graphical overview screen for monitoring system operation
- Alarm screen with date and time stamped faults
- Logged data screen with power and water usage graphs, trend graphs for pressure, level and flow, pump run timers and and system event counters
- System diagnostics screen for easy fault finding, pump rotation testing
- Easy setup commissioning wizard
- Advanced parameter adjustment
- Inputs:
- 2x analogue 4-20mA input for transducers
- 3x digital 24Vdc inputs for float/pressure/flow switches
- 1x digital, pulse input for flow meter
- Standard terminal setup: Primary and secondary level transducers, backup low level float and high level float
- Outputs:
- 1-12 pump supply outputs
- 5x assignable BMS volt free outputs
- 2x analogue 4-20mA BMS outputs for analogue readings
- Modbus RS485 connections
Function Features
- Operation:
- Maximum run timer and auto alternation of pump duty
- Anti seize timer runs pumps periodically during low use
- Pump 1 can be configured as a main pump, jacking pump or a mixer
- Maximum idle time ensures minimum tank level is maintained
- Staggered pump start and stop
- Pump limiting
- Static lead pump for applications with low average flows but high peak flows
- Supply tank level monitoring (if using level transducer in supply tank instead of backup transducer)
- Manual override timer control when system is in fault shutdown
- Fault protection:
- Pump overload and prime loss shut-down
- Automatic changeover on pump fault
- High and low level/pressure shut-down
- Supply tank low level protection
- Pump cycle protection
- Transducer redundancy switches to backup transducer if first one fails (if using secondary tansducer)
Optional Modifications
- 316 stainless steel enclosure
- Modbus TCP gateway with ethernet port
- Netbiter remote access
- Mains bypass, tank top up or well wash control with solenoid valve
- UV lamp control
- Generator input socket and automatic changeover
Common Applications
- Level Control:
- Pressure Control:
- Temperature Control:
Download Range Overview
Innovators, Manufacturers and Distributors of Electrical Products