FSA-90000 Smoke Alarm Remote Controller Troubleshooting Guide

Name: MATelec Australia
Address: 5 Telford Dr, Shepparton, VIC, 3630, AU
Telephone: 1800 281 282

1. Remove the battery from the back of the remote.

2. Hold the NET button down for 15 seconds then release.

3. Reinsert the battery.

4. The remote is now reset.

1. Press the Test button on the remote.

2. The red LED on the remote will flash three times.

3. After the third flash, all connected alarms will sound for around 25 seconds, confirming the test has been activated.

4. Once the test finishes, the red LED on each alarm will flash once every second for three minutes to indicate a successful test.

For more guidance, watch the video:

Using the MATelec FSA-90000 Remote with FSA-30000, DET-SMK/RF/AC/1 and /10 Smoke Alarms

1. If a false alarm occurs, press the Hush button on the remote. This will silence the triggered alarm for 10 minutes.

2. If you have multiple interconnected alarms, you can identify which one triggered by pressing the Locate button on the remote.

3. The red LED on the triggered alarm will flash and sound enabling easy identification.

For more guidance, watch the video:

Using the MATelec FSA-90000 Remote with FSA-30000, DET-SMK/RF/AC/1 and /10 Smoke Alarms

The SOS function can be used during non-fire emergencies to quickly alert others in the home.

1. Press the SOS button to activate all interconnected alarms.

2. To turn off SOS mode, press the Locate button and wait three seconds.

For more guidance, watch the video:

Using the MATelec FSA-90000 Remote with FSA-30000, DET-SMK/RF/AC/1 and /10 Smoke Alarms

Pairing the MATelec FSA-90000 Wireless Remote with MATelec DET-SMK/RF/AC/1 and /10 Smoke Alarms

Pairing the MATelec FSA-90000 Remote with FSA-30000 and FSA-60000 Smoke Alarms

Pairing the MATelec FSA-90000 Remote as the Master Controller for MATelec Smoke Alarms

Customer Support